Emerson Motorola MVME51005E-0163 Single Board Computer

　　MVME5100 NXP® MPC7410 or MPC750 VME SBC

　　The Artesyn Embedded Technologies MVME5100 series features the NXP MPC7410 or MPC750 microprocessor with 32 KB/32 KB L1 cache. It uses the Artesyn PowerPlus II Architecture to support full PCI throughput of 264MB/s without starving the processor from its memory.

　　Based on an integrated PCI bridge-memory controller ASIC, PowerPlus II enables 582 MB/s memory read bandwidth and 640MB/s burst write bandwidth.

　　The MVME5100 is designed to meet the needs of OEMs servicing the defense and aerospace, industrial automation and transportation market segments.

　　Data Sheet

　　The MVME5100 is designed to meet the needs of OEMs servicing the defense and aerospace, industrial automation and medical market segments

　　MPC7410 or MPC750 microprocessor with 32 KB/32 KB L1 cache

　　Up to 2MB of secondary backside cache

　　100 MHz frontside bus

　　Up to 512MB of on-board ECC SDRAM expandable up to 1GB with optional RAM500 memory expansion modules

　　17MB flash memory

　　Dual IEEE P1386.1 compatible 32/64-bit PMC expansion slots

　　64-bit PCI expansion mezzanine connector allowing up to four more PMCs

　　Dual 16550 compatible async serial ports

　　Dual 10BaseT/100BaseTX Ethernet

　　32 KB NVRAM and time-of-day clock with replaceable battery backup

　　Four 32-bit timers and one watchdog timer

　　On-board debug monitor

　　Single VME slot even when fully configured with two PMC modules and both add-on memory mezzanines

　　Overview

　　I/O COMPATIBILITY

　　Historically, Artesyn has offered two tracks in its PowerPC® Architecture VME portfolio. The first track (which includes the MVME2600/2700) provides typical single-board computer I/O features including Ethernet, SCSI, multiple serial ports, a parallel port and a single PMC slot. The on-board I/O is routed to P2 and made available to the user via Artesyn MVME761 or MVME712M transition boards. The second track (which includes the MVME2300/2400) offers limited on-board I/O (Ethernet and a single serial port both via the front panel) but provides dual PMC slots enabling maximum user I/O customization. The MVME5100 merges the best features of both tracks enabling the OEM to support varying I/O requirements with the same base platform, simplifying part number maintenance, technical expertise requirements and sparing.

　　P2 I/O MODES

　　The MVME5100 supports two, jumper-configurable P2 I/O modes; PMC and IPMC. PMC mode is backward compatible with the MVME2300/MVME2400. In PMC mode, 64 pins from PMC slot 1 and 46 pins from PMC slot 2 are available onP2 for PMC rear I/O. In IPMC mode, the MVME5100 supports legacy MVME761 or MVME712M I/O modules (with limited PMC I/O) when an IPMC761 or IPMC712 PMC card is populated in PMC slot 1. In this configuration, PMC slot 2 contains some signals that are reserved for extended SCSI.

　　IPMC MODULES

　　The IPMC761 and IPMC712 are optional add-on PMC modules that provide backward compatibility with previous-generation Artesyn products (such as MVME2600 and MVME2700) using the MVME761 or MVME712M transition board. IPMC modules provide rear I/O support for the following:

　　One single-ended Ultra Wide SCSI port

　　One parallel port

　　Four serial ports (2 or 3 async and 1 or 2 sync/async, depending on module)

　　With this PMC card configuration, the memory mezzanine, one PMC slot and the PMCspan are still available, providing support for OEM product customization.

　　TRANSITION MODULES

　　The MVME761 transition module provides industry standard connector access to the IEEE 1284 parallel port, a 10BaseT or 100BaseT port via an RJ-45 connector, two DB-9 connectors

　　providing access to the asynchronous serial ports configured as EIA-574 DTE and two HD-26 connectors providing access to the sync/async serial ports. These serial ports, labeled as Serial 3 and Serial 4 on the faceplate of the MVME761, are individually user-configurable as EIA-232, DCE or DTE via the installation of Artesyn Serial Interface Modules (SIMs). A P2 adapter board provides interface signals to the MVME761 transition module. Two separate P2 adapter boards are available: one for 3-row backplanes and one for 5-row backplanes. The 3-row P2 adapter board provides connection for 8-bit SCSI. A 5-row P2 adapter board supports 16-bit SCSI and PMC I/O.

　　The MVME712M transition module provides industry standard connector access to the Centronics parallel port, a narrow SCSI port, and four DB-25 connectors providing access to the asynchronous/synchronous serial ports jumper configurable as EIA-232 DCE or DTE. A P2 adapter board provides interface signals to the MVME712M transition module. The 3-row P2 adapter board also provides connection for 8-bit SCSI. To gain access to the additional user-definable I/O pins provided via the 5-row VME64 extension connector, a special P2 adapter board is available. This adapter panel replaces the traditional 3-row P2 adapter board and extends its capability by providing access to the PMCI/O pins.

　　Software Support

　　FIRMWARE MONITOR

　　Firmware must fulfill the traditional functions of test and initialization and provide operating system boot support. The MVME5100 firmware monitor exceeds these requirements with a proven monitor from the embedded VME leader. It expands features like powerup tests with extensive diagnostics, as well as a powerful evaluation and debug tool for simple checkout or when high-level development debuggers require additional support. All this is included with the MVME5100 firmware; plus it supports booting both operating systems and kernels.

　　OPERATING SYSTEMS AND KERNELS

　　MVME5100 supports booting a variety of operating systems, including VxWorks from Wind River Systems, Inc., Integrity from Green Hills, and Linux from a variety of partners.

MVME51005E-0163.pdf

Related product recommendations:
VMIVME-5530S
VMIVME-7645
VMIVME-4512
VMIVME-7658-330
VMIVME-2170A
VMIVME-5565
VMIVME-4132
VMIVME-5588DMA-210
VMIVME-7588
VMIVME-2170A
VMIVME-6015
VMIVME-4514
VMIVME-4116
VMIVME-1150
more......

RELATED ARTICLE