VMIVME-7807 VME-7807RC Single Board Computer

　　The information in this document has been carefully checked and is believed to be entirely reliable. While all reasonable efforts to ensure accuracy have been taken in the preparation of this manual, GE Fanuc Embedded Systems assumes no responsibility resulting from omissions or errors in this manual, or from the use of information contained herein. GE Fanuc Embedded Systems reserves the right to make any changes, without notice, to this or any of GE Fanuc Embedded Systems’ products to improve reliability, performance, function, or design. GE Fanuc Embedded Systems does not assume any liability arising out of the application or use of any product or circuit described herein; nor does GE Fanuc Embedded Systems convey any license under its patent rights or the rights of others. For warranty and repair policies, refer to GE Fanuc Embedded Systems’ Standard Conditions of Sale. AMXbus, BITMODULE, COSMODULE, DMAbus, IOMax, IOWorks Access, IOWorks Foundation, IOWorks Manager, IOWorks Server, MAGICWARE, MEGAMODULE, PLC ACCELERATOR (ACCELERATION), Quick Link, RTnet, Soft Logic Link, SRTbus, TESTCAL, “The Next Generation PLC”, The PLC Connection, TURBOMODULE, UCLIO, UIOD, UPLC, Visual Soft Logic Control(ler), VMEbus Access, VMEmanager, VMEmonitor, VMEnet, VMEnet II, VMEprobe and VMIC Shutdown are trademarks and The I/O Experts, The I/O Systems Experts, The Soft Logic Experts, and The Total Solutions Provider are service marks of GE Fanuc Embedded Systems. IOWorks, Visual IOWorks and the VMIC logo are registered trademarks of GE Fanuc Embedded Systems. Other registered trademarks are the property of their respective owners. Copyright © 2007 by GE Fanuc Embedded Systems. All Rights Reserved. This document shall not be duplicated, nor its contents used for any purpose, unless granted express written permission from GE Fanuc Embedded Systems. RoHS Compliance The VMIVME-7807 uses the Intel 82546EB Dual Gigabit Ethernet Controller. The VME-7807RC uses the Intel 82546GB Dual Gigabit Ethernet Controller. There are no other differences in Form, Fit or Function between the standard product or the RoHS compliant product with the exception of the RoHS product is free of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs). In conjunction with the WEEE (Waste Electrical & Electronic Equipment) Directive 2002/96/EC (January 27, 2003).

　　GE Fanuc Embedded Systems’ VMIVME-7807/VME-7807RC are full featured Pentium® M-based, single board computers (SBCs) in a single-slot, passively cooled, VME Eurocard form factor. These products utilize the advanced technology of Intel®’s 855GME chipset. The VMIVME-7807/VME-7807RC provide features typically found on desktop systems such as: • 1.0GB DDR SDRAM using one SODIMM and an optional 512MB of solder-in memory for a maximum of 1.5GB • Built-in SVGA support (front panel connection) • Digital video controller (rear I/O) DVI-D with dual head display capabilities • 10/100 Mbit Ethernet controller (front panel connection) • Dual Gigabit Ethernet supporting (front panel or rear I/O) • Optional P0 with VITA 31.1 interface • Serial ATA (SATA) support (rear I/O) • Serial port COM1 (front panel connection) • Ultra IDE drive support (rear I/O) • Real-Time clock/calendar • Front panel reset switch • Miniature speaker • Keyboard/Mouse port (front panel connection) The 855GME chipset allows the VMIVME-7807/VME-7807RC to provide enhanced features such as integrated video and Ultra ATA/100 IDE support. The VMIVME-7807/VME-7807RC are capable of executing many of today’s desktop operating systems such as Microsoft®’s Windows® XP, Windows 2000 and a wide variety of Linux® based operating systems. The standard desktop features of the VMIVME-7807/VME-7807RC are described in Chapter 2 of this manual.

　　Front/Rear Panel Connectors

　　The VMIVME-7807/VME-7807RC provide front panel access for the PMC expansion site, an optional Gigabit Ethernet port, one 10/100 RJ45 connector, one serial port, SVGA, keyboard/mouse, the manual reset switch and the status LEDs. A drawing of the VMIVME-7807/VME-7807RC front panels are shown in Figure 1-5. The front panel connectors and indicators are labeled as follows: • 10/100 10/100 Mbit Ethernet connector • G1 10/100/1000 Mbit Ethernet connector 1 (or LEDs) port 1 • G2 10/100/1000 Mbit Ethernet LEDs port 2 • M/K Mouse/keyboard connector • COM1 Serial Port • RST Manual reset switch • S Status LEDs • SVGA Analog Video connector The VMIVME-7807/VME-7807RC provide rear I/O support for the following: digital video, Serial ATA, COM2, 3 and 4, IDE drive and two USB ports. These signals are accessed by the use of an RTM such as the VMIACC-0586/ACC-0586RC and the VMIACC-0590/ACC-0590RC, which terminates into industry standard connectors. The front panel connectors, including connector pinouts and orientation, for the VMIVME-7807/VME-7807RC are defined in Appendix A. Rear panel connections are defined in the appropiate RTM Installation Guide. Contact Sales for compatible RTMs offered by GE Fanuc Embedded Systems

　　Integrated Peripherals

　　The VMIVME-7807/VME-7807RC incorporate an SMSC Super I/O (SIO) chip. The SIO provides the VMIVME-7807/VME-7807RC with two 16550 UART-compatible serial ports, keyboard and mouse port. The keyboard and mouse ports are available via the front panel using a standard PS/2 type connector. COM1 is accessed via the front panel. COM2 is routed to the VME P2 connector. COM ports 3 and 4 are also provided by the 6300ESB I/O Controller Hub and are routed to the VME P2 connector. The parallel IDE interface is provided by the Intel 6300ESB I/O Controller Hub. The IDE interface supports two channels: primary and secondary. The secondary channel is routed onboard to the optional CompactFlash socket. The primary channel is routed out of the VME P2 backplane connector to an RTM which terminates into a standard 40-pin header. This channel can support a master and slave drive. The IDE interface on the VMIVME-7807/VME-7807RC supports Ultra ATA/33, Ultra ATA/66 and Ultra ATA/100 drives and automatically determines the proper operating mode based on the type of drive used. In order to properly function in the Ultra ATA/100 mode, a special 80 conductor cable must be used instead of the standard 40 conductor cable. This cable is typically available from the Ultra ATA/100 drive manufacturer. A Serial ATA Drive Interface is also provided by the 6300ESB I/O Controller Hub. The Serial ATA port can be used alone or in limited conjunction with the parallel IDE interface.

VME-7807RC.pdf

Recommended products:
VMIVME-7807
VMIVME-7750-744001
VMIVME-7750-746001
VMIVME-7750-760000
VMIVME-7750-834
VMIVME-7486
VMIVME-7455
More......

RELATED ARTICLE