ELAU C400/A8/1/1/1/10 -ELAU-C400-Kullanma-Kilavuzu

　　Notes for working safely with the product

　　The following section contains information regarding safe work with the PacDrive Controller. Anyone using or working on the PacDrive Controller must read and observe this information. The PacDrive Controller is state of the art and conform to recognized technical safety regulations. Nevertheless, the use the PacDrive Controller can present a hazard to life and limb or cause property damage.

　　Proper use

　　The PacDrive Controller is intended for installation in a machine or switching cabinet. What do you need to observe? Proper use includes that you observe the following points and the resulting rules:

　　• The regulative, warning and instruction signs on the connected components and in the switching cabinet

　　• The warning instructions to the PacDrive Controller on the connected components and in the switch cabinet

　　• The inspection and maintenance instructions

　　• The operating instructions of the other components

　　• All other documentation

　　Operate the PacDrive Controller only when they are in a flawless technical condition. Observe the regulations, act with safety and hazards in mind. If circumstances occur that impact safety or cause changes in the operating performance the PacDrive Con‐ troller, switch the PacDrive Controller off immediately and contact the responsible service staff

　　Use only the options and mounting parts specified in the documentation and no thirdparty devices or components that are not expressly approved ELAU recommends. Do not change the PacDrive Controller inappropriately.

　　Before installing, provide for appropriate protective devices in compliance with the local and national standards. Do not commission components without accordant protective devices. After installation, commissioning or repair, test the protective devices used.

　　The components must not be used in the following environments:

　　• In dangerous (explosive) atmospheres

　　• In mobile, movable or floating systems

　　• In life support systems

　　• In domestic appliances

　　• underground

　　You may only use them in accordance with the installation and operating conditions described in the documentation. The operating conditions at the installation location must be checked and maintained in accordance with the required technical data (per‐ formance data and ambient conditions). CN Commissioning is prohibited until it is guaranteed that the usable machine or system in which of the PacDrive Controllers is installed meets all requirements of EC Directive 98/37/EC (machinery directive).

　　In addition, the following standards, directives and regulations are to be observed:

　　• DIN EN 954 Part 1 Safety of machinery - Safety-related parts of control systems

　　•DIN EN 60204 Safety of machinery: Electrical equipment of machines

　　• DIN EN 292 Part 1 and Part 2 Safety of machinery: Basic Concepts, General Prin‐ ciples for Design

　　• DIN EN 50178 Electronic equipment for use in high-current electrical systems

　　• DIN EN 61800-3 Status: 2005-07 speed changeable electrical drives - Part 3: EMCrequirements including special test procedures

　　• The generally applicable local and national safety and accident prevention regu‐ lations.

　　• The rules and regulations on accident prevention and environmental protection that apply in the country where the product is used.

　　• The applicable laws and ordinances

　　Selection and qualification of personnel

　　This manual is geared exclusively toward technically qualified personnel, who have detailed knowledge in the field of automation technology. The description is mainly for construction and application engineers from the engineering and electro-technics di‐ vision as well as service and commissioning engineers.

　　Work on the PacDrive Controller may only be carried out by qualified professionals or by trained staff under the instruction and supervision of a qualified person in accord‐ ance with electrical regulations. Qualified persons are those persons who, as a result of their training, knowledge, and experience and knowledge of the pertinent regula‐ tions, can

　　• evaluate the transferred work,

　　• recognize the meaning of the safety instructions and implement them consistently,

　　• recognize possible hazards and

　　• take appropriate safety measures.

　　Rest dangers

　　Health risks arising from the PacDrive Controller have been reduced by means of safety technology and design engineering. However a residual risk remains, since the PacDrive Controller operates with electrical voltage and electrical currents.

　　If activities involve residual risks, a safety note is made at the appropriate points. The note details the potential hazard and its effects and describes preventative measures to avoid it. The following section contains warnings about residual risks which can be assigned no concrete action. The structure of warning instructions is identical to the safety instructions.

　　PacDrive Controller Family

　　The PacDrive Controller, microprocessor-based control hardware with the VxWorks real-time operating system, centrally implements the PLC and motion functions. A PacDrive Controller synchronizes, coordinates, and creates the motion functions for maximum

　　• 8 drives for the PacDrive Controller C200

　　• 2 drives for the PacDrive Controller C200 A2

　　• 16 drives for the PacDrive Controller C400

　　• 8 drives for the PacDrive Controller C400 A8

　　• 99 drives for the PacDrive Controller C600

　　of a food and packaging machine. Many different HMIs are used for the HMI tasks. Whether it is low-cost clear text or IPC, it is no problem for the flexible PacDrive Controller. The PacDrive P600 Controller is additionally equipped with a full-fledged PC. Due to its PC-based architecture, it can perform HMI tasks with no problem in addition to the usual motion functions.

ELAU-C400-Kullanma-Kilavuzu.pdf

Recommended model:
VMIVME-017614-132
IS215UCVEM09A
IS215UCVEM09A
IS215UCVEM09A
IS215UCVEM10A
VMIVME-7650-83H
More......

RELATED ARTICLE