ALSPA MD2000 | Digital Input Module | ALSTOM | ALSPA MD2000-Shanxi Runsheng

Your current location: Home - Product - Other

ALSPA MD2000 | Digital Input Module | ALSTOM | ALSPA MD2000

It supports multi-channel digital signal acquisition (such as switch signals and sensor signals) and control command output (such as start/stop commands and relay actions), with fast response speed. It is suitable for real-time monitoring and fault diagnosis. It can be integrated with ALSTOM's own systems (such as the EPIC II ESP electrostatic precipitator controller) and third-party equipment (such as modules from ABB, Siemens, Honeywell, etc.), and supports remote management of SCADA systems.

Contact Us

PRODUCT TAGS

Digital Output Module

Digital Quantity Module

Editable Controller

Electric General Gas Turbine Card

Electric Machinery

Excitation Control Module

Excitation System Controller

Programmable Controller

Program Module

Shipbuilding Industry

Ship Controller

Steel Works

Description

　　Many products are not yet listed. Please contact us for more product information.

　　If the product model differs from the displayed image, the model number shall prevail. Please contact us for specific product images; we will arrange to take photos in our warehouse for confirmation.

　　We have 76 shared warehouses worldwide, so it may sometimes take several hours to accurately return the information to you. We apologize for the inconvenience. Of course, we will respond to your inquiries as soon as possible.

　　ALSPA MD2000 Other Names:

　　Analog Input Module ALSPA MD2000

　　ALSPA MD2000 Communication Module

　　Input/Output Module ALSPA MD2000

　　The ALSPA MD2000 is a digital input module manufactured by ALSTOM, widely used in industrial automation, power, environmental protection, and steel industries.

　　Technical Parameters and Specifications

　　Basic Parameters: Operating voltage 220V (DC 24V compatible in some scenarios), output frequency 30kHz-45kHz, operating temperature range 0-85℃ (some models support -20℃ to 70℃), weight approximately 0.16kg, protection rating IP20, compatible with PLC/DCS systems (such as MicroNet, NEP platforms).

　　Physical Characteristics: Module size is mostly 16×25×26cm, using DIN rail or slot-type backplane mounting, supports multi-channel digital input/output (such as PNP/NPN interfaces), and has LED status indicators to display real-time operating, communication, and alarm status.

　　Electrical Performance: High electrical isolation design (anti-electromagnetic interference), supports redundant configuration, CE certified, meets international industrial standards.

　　Functional Characteristics

　　Signal Processing: Supports multi-channel digital signal acquisition (such as switch signals, sensor signals) and control command output (such as start/stop commands, relay actions), fast response speed, suitable for real-time monitoring and fault diagnosis.

　　Compatibility and Expandability: Integrates with ALSTOM's proprietary systems (such as the EPIC II ESP electrostatic precipitator controller) and third-party equipment (such as modules from ABB, Siemens, Honeywell, etc.), supporting remote management via SCADA systems.

　　Reliability and Maintenance: Adopts a modular design, supports hot-swapping for easy maintenance and replacement; built-in fault detection monitors abnormal input signals and triggers alarms, ensuring system stability.

　　Technology Extension and Related Systems

　　Multi-threading (MT) Support: Some models achieve multi-threaded parallel processing by replicating a small number of CPU components, improving instruction execution efficiency and suitable for industrial scenarios with high real-time requirements.

　　Safety Standards: Complies with safety standards such as IEC 60204 and ISO 12100. The STO (Safe Torque Off) function requires the use of an electromechanical braking device to achieve functional safety.

　　System Compatibility: Integrates with DCS/PLC systems from ABB, Siemens, Emerson, etc., supporting communication protocols such as MODBUS and PROFIBUS.

　　Installation and Configuration Guide

　　Installation Requirements

　　Electrical Wiring: Power cables and control cables must be laid separately, maintaining a spacing of ≥200mm to reduce interference; shielded cables must be grounded at both ends.

　　Environmental Conditions: Avoid high temperature, high humidity, and strong electromagnetic interference environments; ensure ventilation and heat dissipation.

　　Wiring Standards: Follow IEC 60204 standard; correctly connect input/output ports to prevent short circuits or reverse connections.

　　Configuration Steps

　　Configure communication parameters (such as baud rate and address) via the Modbus RTU protocol.

　　Map input signals in the PLC/DCS system, setting the data acquisition cycle and trigger logic.

　　During the testing phase, verify signal stability and communication reliability, ensuring no packet loss or delay.

　　Troubleshooting and Maintenance

　　Common Problems and Solutions

　　Communication Faults: Check if the Modbus RTU configuration is correct; confirm that there are no open circuits or interference in the bus connection; use diagnostic tools to test signal strength.

　　Power Supply Issues: Verify that the input voltage is within the range of 24V DC ±10%; check the power module and fuse status.

　　Signal Anomaly: Check for faults in the input signal source (such as sensors or switches), and confirm the effectiveness of grounding and shielding measures.

　　Maintenance Recommendations:

　　Regularly clean the module surface and interfaces to prevent dust accumulation from affecting heat dissipation or contact.

　　Update firmware to the latest version to fix known compatibility issues or optimize performance.

　　Back up configuration data for quick system recovery or device migration.

　　Application Scenarios:

　　Power Industry: Used in automated control systems for thermal power plants, hydropower stations, and substations, such as circuit breaker status monitoring, valve position feedback, and protective relay control.

　　Environmental Protection: Used as a core control module in electrostatic precipitators (ESPs) to adjust dust emission parameters and optimize the operating efficiency of environmental protection equipment.

　　Industrial Automation: Suitable for PLC/DCS systems in industries such as steel, chemical, and manufacturing, enabling digital monitoring and intelligent control of production processes.

　　Rail Transportation: Some models (such as N897164610L) are used in train or vehicle control systems to ensure the accuracy and safety of signal transmission.

　　Industry Compatibility and Advantages

　　High Reliability: Designed for industrial environments, it withstands high temperatures, high humidity, and strong electromagnetic interference, ensuring stable operation under harsh conditions.

　　Flexible Configuration: Supports programmable settings, allowing adjustment of input/output channel parameters to suit different application scenarios.

　　Summary: The ALSTOM ALSPA MD2000 digital input module is a high-performance, high-reliability industrial-grade product suitable for various automation scenarios. Its standardized design, flexible configuration, and wide compatibility make it an ideal choice for industrial control systems. During installation, configuration, and maintenance, strict adherence to specifications and utilization of official resources are essential to ensure stable system operation.

　　All products on this website are special products, and market prices are constantly fluctuating.

　　Please refer to customer service for a quote, as the price may not be accurate for new products.

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. This website is currently in use.

　　New products are available for sale; please contact customer service for further information.

Previous: None

Next: None