Many products are not yet available. Please contact us for more information.

　　If the product model number differs from the displayed image, the model number will prevail. Please contact us for specific product images, and we will arrange for photos to be taken at the warehouse for verification.

　　We have 76 shared warehouses worldwide, so it may sometimes take several hours for us to accurately deliver your product. Please understand. We will, of course, respond to your inquiries as soon as possible.

　　AAP3403893-00351 Other Names:

　　Control Unit AAP3403893-00351

　　AAP3403893-00351 Operation Unit

　　Touch Screen AAP3403893-00351

　　Technical Parameters and Configuration

　　Core Components: Part of the MU control system, including the control box, MU panel, I/O board, sensors (such as exhaust pressure sensor and oil pressure sensor), intermediate relay (AB brand), solid-state relay, 24V/48V DC power supply, etc. Supports Modbus TCP protocol, features 100/1000M Ethernet, RS485 serial, USB/HDMI peripheral interfaces, and an operating temperature range of -40°C to 85°C.

　　Compatibility: Compatible with Ingersoll Rand Cameron series centrifugal compressors (such as the TA2000, TA3000, TA6000, TA9000, TA11000, and MSG series), and can be integrated with QUAD2000 and VANTAGE system upgrades.

　　Electrical Specifications: Powered by 24VDC control panel and 100-240VAC panel. Supports dry contact input/output, and relay output types include 12V/800mA and Form C relays.

　　Environmental Adaptability: Operating temperature 0-60°C, storage temperature -25-60°C, maximum relative humidity 95% (non-condensing).

　　Communications: Supports C-Link network port and Modbus protocol, and can be expanded with up to three I/O modules.

　　Installation and Maintenance

　　Hardware Installation:

　　Requires a control box, I/O module (such as AAP3798102-00131), sensors, relays, and wiring troughs.

　　Wiring Requirements: Shielded cables must be grounded at one end to prevent signal interference; digital inputs/outputs must be equipped with LED indicators and overcurrent protection.

　　Installation Steps: Secure the control box → Connect power/signal cables → Install the I/O module → Configure network parameters (default IP: 10.1.1.10).

　　Software Configuration:

　　Use a dedicated tool (such as the MC Configuration Tool) to search for devices, set IP addresses, load parameters, and import authorization files.

　　Access the device's IP address (such as 10.60.60.100) through a browser and enter the default username/password (admin/admin12345) to log in and configure the device.

　　Installation Steps:

　　Insert the circuit board: Insert the control cable into the circuit board's wiring port. Secure the circuit board's screws and ensure the emergency button is operable.

　　Film Application: Remove the adhesive backing and apply the film to the door frame, aligning it with the center of the emergency button, symmetrically on both sides.

　　Network Configuration: Use the MC Configuration Tool to set the IP address (default 10.1.1.10), ensure the device and computer are on the same network segment, and complete the import of the authorization file.

　　Maintenance and Troubleshooting

　　Daily Maintenance:

　　Regularly check the power supply, wiring, and sensor status, and clean the filter and heat sink.

　　Follow the manufacturer's maintenance manual for lubricant replacement, filter cleaning, and electrical connection tightening.

　　Common Faults and Solutions:

　　Power Failure: Check voltage stability, fuses, and power module status.

　　Communication Interruption: Verify network wiring, IP configuration, and protocol compatibility (e.g., Modbus address conflicts).

　　Output Abnormality: Check the digital output load, relay status, and software parameter settings.

　　Sensor Failure: Calibrate the RTD/current sensor and check the signal cable shielding and grounding.

　　All products on this website are special editions, and market prices are constantly fluctuating.

　　Please refer to customer service for specific quotes. Since these products are new, prices are not official.

　　Please confirm model, product, price, and other details with customer service before placing an order. This website is used.

　　New products are currently available for sale, so please contact customer service.

Related product recommendations:
Uniop ETOP12-0050-SU
Uniop ETOP20B0045
Uniop ETOP306U3016
Uniop ETOP607MU5P1
Uniop ETOP605U5P1
Uniop ETOP40B-0050
Uniop ETOP515U3P1
Uniop TOP40B-0050
Uniop eTOP506U2P1
Uniop eTOP133C-0050
Uniop ETOP510U3P1
UniOP eTOP507U2P1
UniOP ETOP12-0052
UniOP eTOP40C 6ZA1013-7ME3
UNIOP eTOP507U201
More......