Many products have not yet been launched, please contact us for more products

　　If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

　　We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

　　WES5302-150 Other names:

　　Input/output module WES5302-150

　　WES5302-150 Analog Control Board

　　Editable Control Board WES5302-150

　　The VME-2170A optocoupler digital output board consists of VMEbus compatible logic, data control logic, four 8-bit output registers, and 32 optically isolated high-level outputs. This board adopts a dual Euro card external size PC board, providing all necessary address decoding and data transmission control logic to accept 8-bit and 16 bit data transmission. The optocoupler isolates 32 outputs from each other and from VMEbus. Support monitoring and non privileged data transmission.

　　This unit is part of the General Electric Fanuc Automation VMIC series of digital converters, input and output units, and other circuit boards. This unit is specifically listed as WES5302-150, which is a model of digital output board. The board is equipped with a set of optocouplers. The module framework includes many features such as 32 optically isolated outputs, outputs ranging from 2.5 to 300 milliamps, and field configurable pull-up resistors. The VWES5302-150module requires a pull-up voltage that can be applied externally. It has optocoupler output, allowing digital signals to be transmitted through fiber optic cables, greatly reducing the risk of electromagnetic interference and providing current isolation.

　　The WES5302-150 model is equipped with dual Eurocard external size PC boards, which can provide necessary address decoding and data transmission control logic, and can accept 8-bit and 16 bit data transmission. The optocoupler can isolate 32 outputs from each other and from the VMEbus module. VWES5302-150can support two types of data transmission, monitoring data, and non privileged data.

　　WES5302-150 has multiple functional features. In terms of board functionality, it has 32-bit processing capability, adopts optical isolation, and is specifically designed and optimized for VMEbus. WES5302-150 has such a high isolation rate, and it also provides a flexible and cost-effective 4-byte digital output port with high noise resistance.

　　Main features:

　　Optical coupling: Using optical couplers to achieve isolation between 32 outputs and VMEbus modules, supporting monitoring and non privileged data transmission.

　　Output capability: Provides 32 isolated outputs, with current options ranging from 2.5mA to 300mA, and can provide up to 30V voltage under normal mode operation.

　　Isolation specifications: Provides high isolation voltage capability, with continuous isolation up to 1000V and pulse isolation up to 6000V.

　　Configuration flexibility: including on-site configurable pull-up resistors that can be configured as source or receiver output modes.

　　Data transmission: Supports 8-bit and 16 bit data transmission rates, with onboard DIP switches for address selection.

　　Physical dimensions: Complies with the external dimensions of dual Euro cards, measuring 9.2 inches in height, 6.3 inches in depth, and 0.8 inches in thickness.

　　Working conditions: The designed normal working temperature range is 0 to+55 ° C, and the storage temperature range is -20 to+85 ° C.

　　Compatibility: Ensure compatibility between the motherboard and the rest of the VME system, including bus slot types (such as single width, double width) and power requirements.

　　Software support: Check the driver program and software support for the interface with the motherboard. This may involve operating system specific libraries or APIs used to control the motherboard and manage data transfer.

　　Cables and connectors: Familiar with the required fiber optic cables and connectors. These may vary depending on the specific fiber optic interfaces supported by the motherboard.

　　Installation and configuration: Follow the manufacturer's installation and initial configuration guidelines. This may include setting up physical connections, configuring circuit board settings, and testing optical links to ensure proper operation.

　　Application:

　　The digital control of VME bus is very suitable for applications that require safe transmission of digital control signals in noisy environments.

　　Grounding loop elimination: helps eliminate grounding loops by isolating control signals from loads.

　　Control of multi voltage systems: suitable for controlling components in systems with different voltage requirements.

　　Compatibility and usability: WES5302-150 is compatible with standard dual high VME printed circuit boards in terms of electrical and mechanical specifications.

　　All products on this website are special products, and market prices have been fluctuating,

　　Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　The new one is for sale, please contact customer service for further communication.

Related product recommendations:
VMIVME-3113A
VMIVME-7697
VMIVME-7486
VMIVME-2540
VMIVME-2536
VMIVME-1128
VMIVME-7671
VMIVME-2528
VMIVME-1182
VMIVME-5521
VMIVME-2128
VMIVME-9304
VMIVME-7686
VMIVME-3122-210
VMIVME-7450
VMIVME-4116
VMIVME-1150
VMIVME-7452
VMIVME-3112
VMIVME-6015
IS200AEPGG1AAA
more......