IS420YAICS1B - Analog I/O module in stock, shipped on the same day.

　　IS420YAICS1B - Analog I/O module in unused and rebuilt state.

　　If you want to get the best discount on IS420YAICS1B - Analog I/O Module, please contact us and we will reply to you within 24 hours.

　　IS420YAICS1B Other names:

　　Gas turbine module IS420YAICS1B

　　IS420YAICS1B controller module

　　Analog controller IS420YAICS1B

　　Product Description

　　The analog I/O package IS420YAICS1B is part of the Mark VIe series produced by General Electric. This I/O pack can connect up to two Ethernet networks and one terminal analog I/O board. This package can handle up to ten analog inputs, two of which can be configured as ± 1 mA or 4-20 mA current inputs, the remaining eight as ± 5 V or ± 10 V inputs, or 4-20 mA current loop inputs. This package can send and receive data through dual RJ45 Ethernet connectors.

　　Although various devices in the Mark VIe series can be used for dual machine, TMR, or single machine redundant applications, the IS420YAICS1B I/O package can only be used for TMR or single machine applications. Please note that when using this package in TMR redundant applications, three I/O packages will be used, while only one I/O package will be used in single machine redundant applications. Another important note is that all I/O packets within the TMR group must use the same hardware form. There is another version of the YAIC I/O package, marked as IS420YAICS1A package. Please note that the package version cannot be mixed on the same T-terminal board.

　　The IS420YAICS1B I/O package can perform multiple self diagnostic tests, some of which are power on self-tests that can check flash and RAM memory, most processor board hardware, and Ethernet ports on the package. This package also continuously monitors internal power supply to ensure normal operation.

　　Function Description

　　IS420YAICS1B is an analog I/O module designed and developed by GE. It is part of the GE Mark VIeS control system. Analog I/O pack (YAIC) is an electrical interface that can connect one or two I/O Ethernet networks to the analog input/output terminal board. YAIC includes processor boards shared by all Mark VIeS Safety controlled distributed I/O packages, as well as acquisition boards dedicated to analog input functionality. The I/O package supports up to ten analog inputs, of which the first eight can be configured as 5 V or 10 V or 4-20 mA current loop inputs. The last two inputs can be set to either 1 mA or 0-20 mA current input.

　　Features

　　This component has a current loop input and is supplemented by a load terminal resistor located on the terminal board. These resistors can achieve precise current loop measurement, ensuring accurate and reliable control and monitoring data.

　　It has dual 0-20 mA current loop outputs. These outputs are crucial for seamless connection with other systems and devices, helping to transmit control signals and sensor data to external components. Whether used for process control or data collection, these outputs can enhance versatility and connectivity.

　　The three pin power input ensures efficient operation of the device and stable and reliable performance. In addition, the addition of two RJ-45 Ethernet connectors has expanded its connection options, enabling data exchange and communication with networked systems, and enhancing its adaptability in modern industrial environments.

　　This component simplifies the output process and has a DC-37 pin connector that is directly connected to the relevant terminal board connector. This simplifies the connection program, reduces setup time, and ensures reliable data transmission. In addition, the device also integrates LED indicator lights, which can provide valuable visual diagnosis. These indicator lights provide real-time information about operational status, simplifying troubleshooting and maintenance tasks.

　　Integration ensures compatibility and simplifies the installation process, enabling users to effectively utilize its features. In addition, this component is received by a single DC-37-pin connector on a simplex terminal, further simplifying the connection process and ensuring safe and reliable connection to the system.

　　Combining precision, connectivity, and user friendliness, effectively meeting the needs of industrial applications. It can provide precise measurements, seamless interfaces, and simplified connectivity, making it a valuable asset for enhancing control and monitoring functions in industrial environments.

　　Installation

　　Firmly install the selected terminal board.

　　Insert one simplex YAIC I/O package or three TMR YAIC I/O packages directly into the terminal board connector.

　　Use the threaded bolts next to the Ethernet port to mechanically secure the battery pack. The bolts are installed on a dedicated mounting bracket for the terminal board. The placement of the bracket should ensure that the -37 connector between the battery pack and the terminal board is not subjected to a right angle force. Within the service life of the product, it only needs to be adjusted once.

　　According to the system configuration, connect one or two Ethernet cables. This package can be used with any port. When using dual connections, ENET1 is usually connected to the network associated with the R controller.

　　Insert the connector on the side of the battery pack into the battery pack to connect it to the power source. There is no need to insert this connector with the power and cable disconnected, as the I/O battery pack has an inherent soft start function that can control current surges during power application.

　　Configure I/O packages as needed.

　　Connector

　　The I/O package contains the following connectors:

　　The DC-37 pin connector at the bottom of the YAIC is connected to the discrete input terminal board. 24 input signals, ID signals, relay coil power supply, and feedback multiplexing commands are all located on the connector.

　　The main system interface is an RJ-45 Ethernet connector labeled ENET1 on the side of the package.

　　The redundant or auxiliary system interface is the second RJ-45 Ethernet connector named ENET2 on the side of the I/O package.

　　The 3-pin power connector on the side of the battery pack provides 28 V DC power to the battery pack and terminal board.

　　Product attributes

　　This product has excellent accuracy, ensuring precise input measurement height. Its accuracy is 0.1% of full scale, providing reliable data even when operating at changing temperatures, and maintaining consistent performance throughout the entire temperature range. This level of accuracy is crucial for precise measurement applications.

　　In order to maintain signal integrity and minimize interference, this product adopts a powerful noise suppression mechanism. It adopts a hardware filter with unipolar attenuation starting from 500 rad/s. This hardware filter can effectively eliminate unnecessary high-frequency noise in the input signal, ensuring clean and reliable data.

　　In addition to hardware filtering, this product also provides software filters. This filter adopts a bipolar low-pass filter configuration and can be adjusted to various cutoff frequencies: 0.75 Hz, 1.5 Hz, 3 Hz, 6 Hz, and 12 Hz. This flexibility allows users to customize filters based on their specific noise suppression needs, thereby further improving signal quality.

　　Common mode rejection (CMR) is crucial for suppressing unwanted interference or noise that appears as a common signal on two input leads. This product performs well in this regard, providing an impressive 60 dB AC CMR at 60 Hz. This level of CMR ensures effective elimination of interference from common sources such as electrical noise.

　　Even when handling common mode voltages up to ± 5 V, the AC CMR remains stable. This means that even with relatively high common mode voltage, the device can still maintain the ability to suppress unwanted noise, ensuring the accuracy and reliability of the measurement signal.

　　Compatibility

　　The I/O package contains an internal processor board, while YAICS1A contains a BPPB processor board. The component lifecycle of this processor is limited, and firmware support is only up to V04.06.

　　Upgrade from ToolboxST application to firmware V04.06 or higher. Firmware V05.00 and higher are not supported.

　　This component contains a BPPC processor board that is compatible with ControlST software suite V06.01 or higher and firmware V05.01 or higher.

　　I/O package versions YAICS1A and YAICS1B cannot be mixed on the same T-terminal board. The three I/O packets of the TMR group must all be in the same hardware form. It is designed to be used in conjunction with TBAISIC and STAIS # A terminal boards.

　　Simplex uses a single I/O package with one or two IONet connections.

　　TMR uses three I/O packets, each with a separate IONet connection.

　　Analog input configuration

　　The I/O package can accommodate up to 10 analog inputs and has unique configuration features. Eight of these inputs can be configured as 5 V or 10 V inputs or 4-20 mA loop inputs, which can flexibly adapt to different sensor requirements.

　　The other two inputs are specifically designed for 1 mA or 4-20 mA current input.

　　Network functions

　　This I/O package is a critical interface within the Mark VIe system. It can seamlessly connect up to two Ethernet networks and one terminal analog I/O board.

　　Data communication is achieved through dual RJ45 Ethernet connectors, ensuring stable connectivity.

　　Redundancy considerations

　　Although many devices in the Mark VIe series support dual, TMR (Triple Modular Redundancy), or simplex redundant configurations, it should be noted that I/O packages are only compatible with TMR or simplex applications.

　　In TMR redundancy, three I/O packets are used, while in pure redundancy, one I/O packet is sufficient. In addition, all I/O packets within the TMR group must share the same hardware form.

　　Diagnosis and environmental performance

　　The I/O module integrates powerful self diagnostic functions. At startup, it will perform a comprehensive power on self-test to check the flash and RAM memory, processor board hardware, and Ethernet ports for optimal functionality. In addition, continuous monitoring of internal power supply can ensure normal operation.

　　This I/O package can operate efficiently in an ambient temperature range of -40 to 158 ° F, with a 16 bit ADC that enables precise input conversion. Its dimensions are 3.25 inches high x 1.65 inches wide x 4.78 inches deep, making it a compact and powerful component in the system. Ensure compatibility with ControlST software suite version V06.01 and higher, and set the required firmware version to V05.01 or higher.

　　Frequently asked questions

　　What is IS420YAICS1B?

　　It is an analog I/O module designed and developed by GE

　　What types of outputs does YAIC have?

　　It has two 0-20 mA current loop outputs.

　　How is the module powered?

　　Using a three pin power input for power supply.

　　How do modules connect to terminal boards?

　　YAIC is directly installed on the Mark VIeS terminal board and received by a single DC-37-pin connector on the simplex terminal board.

　　What types of terminal boards can operate in simplex mode with a single module installed?

　　The terminal board with TMR function has three DC-37-pin connectors, which can operate in simplex mode when installing a single module.

　　Comment on IS420YAICS1B

　　The IS420YAICS1B I/O package can be used for both simplex and TMR redundant applications. Multiple YAIC I/O packages will be used in TMR redundant applications.

　　All products on this website are special products, and market prices have been fluctuating,

　　The specific customer service quotation shall prevail, as the product is a new product and the price is not genuine,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　The new one is for sale, please contact customer service to communicate.

Warehouse model recommendation:
IS415UCVHH1AB
IS215UCVHM06A
IS415UCVHH1A
IS420ESWBH2A
IS420ESWBH3AX
IS420UCSBH4A
IS420ESWBH3A
IS420UCSCH1A
IS420UCSCH2A
IS40yWROHH1A
IS40yWROFH1A
IS40yWROBH1A
IS420UCSCH2A
More......