Many products have not been listed yet. For more products, please contact us

　　If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse

　　We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

　　The IS220PDIAH1A is an I/O pack that has two Ethernet ports. It is a critical component of the GE Speedtronic MK VI gas turbine control series. This pack is described as a discrete input-output pack and can be used with other terminal boards.

　　Product Description

　　Labeled as a Discrete I/O Pack the IS220PDIAH1A model is used in the Mark VI Series alongside the YDIA Discrete Input Module as well. Several different associated terminal boards can be used with the PDIA model which includes the following:

　　IS200TBCIH4C

　　IS200STCIH1A

　　IS200STCIH8A

　　IS200TBCIH2C

　　IS200TCIH2A

　　These models all work together with the PDIA to be approved for usage in hazardous locations. When being used in hazardous environments there are specific certifications needed. Certification ULE207685 is used for non-hazardous, Class I Zone 2 Group IIC, and Class I Division 2 Groups, A, B, C, and D locations. There is a specific certification required when being used in ATEX Zone 2 Group IIC locations, the certification is UL DEMKO 12 ATEX 1114875X.https://www.axcontroler.com/

　　Compared to other models in the Mark VI Series the IS220PDIAH1A does not necessarily have a specific faceplate as it is an I/O pack. On the front of the device, there are seven indicators, on the right side of the pack in a group of three there are indicators for the power and two for the link, one is indicated as ENet1, and the other ENet2. Underneath these three indicators, there is an Ethernet port which is used for cabling the model to the Ethernet to allow for easy Ethernet communication.

　　The IS220PDIAH1B is a GE Mark VIe I/O pack that combines with various GE terminal boards. 　The IS220PDIAH1B is approved for use in hazardous locations. The PDIA I/O can be paired with a number of different terminal boards including IS200STCIH1A and 2A, IS200STCIH8A, Is200TBCIH2C, or H4C, IS400TBCIH2C, IS400STCIH1A or 2A, or IS400STCIH8A. These are typically power distribution boards that are part of the Mark VIe Speedtronic system.

　　The IS220PDIAH1B I/O pack has a nominal voltage rating of 24.0 VDC with a max rating of 28.6. Contact inputs have a max voltage rating of 32 VDC. The unit is UL listed for both non-hazardous and hazardous locations. See documentation for all of the different Class and Zone UL markings. The IS220PDIAH1B is designed for use in temperatures between -30 to +65 degrees celsius (ambient temperature).

　　Additional information about this I/O pack can be found through GE's original documentation like manuals or user guides.

　　The IS220PDIAH1A pack has location standards two of which are UL 600790 Ed. 5 and UL 60079-15 Ed. 3 for use in Class I Zone 2 Group IIC. This information can be found in the GEH-6725 Mark VI Controls Equipment Hazloc Manual which is located above under the manuals tab.

　　The IS220PDIAH1B is a GE Mark VIe I/O pack. This can be used with a number of different GE terminal boards. The IS220PDIAH1B has been certified for usage in hazardous environments. IS200STCIH8A, IS200STCIH1A, and 2A, IS200TBCIH2C or H4C, IS400STCIH1A or 2A, IS400TBCIH2C, or IS400STCIH8A are some of the terminal boards that can be used with the PDIA I/O.These are usually power distribution boards from the Speedtronic Mark VIe system.

　　The nominal voltage rating of this I/O pack is 24 VDC, with a maximum voltage rating of 28.6 VDC.

　　The maximum voltage rating for contact inputs is 32 VDC.

　　Both non-hazardous and hazardous areas are covered by the UL listing.

　　All of the different Class and Zone UL designations can be found in the documentation.

　　This module is suitable for temperatures ranging from -30 to +65 degrees Celsius.

　　Reviews For IS220PDIAH1A

　　The PDIA model is best used in the Mark VI System if a Discrete I/O pack is required. It must be used with several associated terminal boards to ensure that it can properly function in hazardous locations. Refer to the GEH-6725 manual for information on the associated terminal boards needed.

　　Frequently Asked Questions

　　What is IS220PDIAH1B?

　　The IS220PDIAH1B is a Terminal Board card developed under the Mark VIe system.

　　What is the voltage rating of IS220PDIAH1B?

　　The nominal voltage rating of the IS220PDIAH1B I/O pack is 24.0 VDC, with a maximum voltage rating of 28.6 VDC.

　　What is the temperature range of the IS220PDIAH1B?

　　IS220PDIAH1B is appropriate for temperatures ranging from -30 to +65 degrees Celsius.

Model recommendation:
GE DS200TCQBG1BCB
GE IS220YDIAS1B
GE DS200TCDAH1BHE
GE IS420ESWBH3A
GE IS220PDIOH1BB
GE IS220PDIOH1B
GE IS220PDOAH1A
GE IS220PDOAH1A
GE IS220PPDAH1B
GE IS220PPRFH1A
GE IS220PRTDH1A
GE 04220FL11232A
GE 04240FD11234A