Many products are not yet on the shelves. Please contact us for more products.

　　If the product model is inconsistent with the display picture, the model shall prevail. Please contact us for specific product pictures, and we will arrange to take photos in the warehouse for confirmation.

　　We have 76 shared warehouses around the world, so sometimes it may take several hours to accurately return to you, please understand. Of course, we will respond to your concerns as soon as possible.

　　IC800SDM250M2KE25C Other names:

　　Drive unit IC800SDM250M2KE25C

　　IC800SDM250M2KE25C Control unit

　　Analog unit IC800SDM250M2KE25C

　　IC800SDM250M2KE25C is a high-performance servo controller launched by General Electric (GE), belonging to its SDM800 series of intelligent motor protection controllers. It uses a 32-bit floating-point processor, supports single-axis control, has a maximum output frequency of 100kHz, can achieve high-precision position and speed control, and has linear/circular interpolation functions. This product is designed for low-voltage motors, integrates protection, measurement, and control functions, supports network communication, and is suitable for multi-axis control scenarios in industrial automation.

　　Modular design: supports flexible configuration, can expand functions according to needs, adapts to the integration needs of complex automation systems, integrates protection, measurement, and control functions, and simplifies system design.

　　Multi-axis control capability: supports multi-axis linkage control (the specific number of axes needs to refer to the official manual), suitable for high-precision equipment such as CNC machine tools and robots.

　　Network communication capability: supports industrial Ethernet protocols such as EtherCAT and Profinet, which is convenient for data exchange and system integration with other devices (such as PLCs and sensors).

　　Rich I/O interfaces: provides digital input/output ports, supports flexible configuration, and meets the I/O requirements of different application scenarios.

　　Programming and compatibility: Supports IEC 61131-3 standard programming languages (such as ladder diagrams and function block diagrams), which is convenient for user-customized development, compatible with a variety of encoders and motor types, and has strong adaptability.

　　Protection and safety functions: Built-in protection functions such as overload, phase loss, and imbalance ensure the safe operation of the motor, support real-time status monitoring and fault alarm, and improve system reliability.

　　Core parameters and performance

　　Number of control axes: This model supports multi-axis control. The specific number of axes needs to be combined with the application scenario (such as IC800MCUB12160XD supports 10 axes). It is speculated that it may be adapted to multi-axis complex systems.

　　Interpolation function: Supports linear interpolation and circular interpolation, suitable for scenarios such as CNC machine tools and robots that require complex trajectory control.

　　Communication protocol: Compatible with industrial Ethernet protocols such as EtherCAT, Profinet, and Ethernet/IP, supporting high-speed data transmission and real-time control.

　　Control accuracy and response: Position accuracy can reach ±1 micron, and the maximum output frequency is 200 KHz, ensuring high-speed and high-precision motion control.

　　Safety operation specifications

　　Warning: Non-professionals are prohibited from disassembling, and high-temperature parts such as heat sinks are prohibited from touching when powered on.

　　Parameter settings: User parameters (A area 1-45) and system parameters (B area 46-79) need to be adjusted through the operation panel.

　　Sewing type settings: Support free sewing, continuous reinforcement sewing, fixed needle sewing and other modes, and can adjust the number of stitches and the number of back sewing times.

　　Function parameter description

　　Key definition:

　　M key: increase or decrease parameter number (press and hold for continuous adjustment).

　　P key: enter/exit parameter editing state (press and hold for 2-3 seconds).

　　Speed adjustment: adjust the motor speed through the specified key, support ±50 turn step adjustment.

　　Mechanical installation

　　Forced air cooling, 3 inches of cooling space must be reserved

　　When installed vertically, the oil seal must be lower than the oil level line to prevent grease leakage

　　Electrical debugging

　　Support electronic gear ratio setting (N/M range 1/50~200)

　　Provide brake power supply (24VDC independent power supply, standard for models above 100W)

　　Anti-interference measures

　　Encoder cable needs to be grounded at both ends, and the shielding layer is 360° ring-connected

　　Power cable and signal line are separated (recommended spacing>20cm)

　　Application scenarios

　　CNC machine tools: realize high-precision parts processing.

　　Industrial robots: control motion posture and trajectory.

　　Precision assembly line: suitable for electronics, semiconductors and other industries.

　　Packaging and printing machinery: high-speed, high-precision operation control.

　　Textile machinery: electronic warp feeding/winding system (synchronous control error<0.5°)

　　Equipment adaptability: The controller has a compact structure and is suitable for space-constrained automation equipment such as precision robotic arms, rotary tables, etc. through patented positioning design (such as precise fixation of interface board and control board, power board and heat sink).

　　Multi-protocol integration: Supports real-time protocols such as EtherCAT, suitable for scenarios requiring multi-axis synchronous control, such as CNC machine tools, printing equipment, etc.

　　Summary: IC800SDM250M2KE25C is a servo controller with high performance and flexibility, suitable for industrial automation scenarios with high requirements for control accuracy and reliability. Its modular design and network communication capabilities can help enterprises achieve efficient and accurate motion control.

　　All products on this website are special products, and market prices have been fluctuating.

　　Specific quotation shall be subject to customer service, because the product is a new product and the price is not real.

　　Please confirm the model, product, price and other detailed information with customer service before placing an order. The website has been used.

　　New ones are on sale, please contact customer service for communication.

Related product recommendations:
DS202DACAG2
DS200TCPDG1BEC
IS410TRLYS1B
IS2020RKPSG3A
IS220YAICS1A-L
IS200TRPGH1BDD
IS200TSVCH1ADC
IS200TTURH1CCC
IS200TSVCH1AED
IS200JPDMG1ACC
IS420UCSCH1A-B
IS420UCSCH1A-F-VO.1-A
IC800VMMCONE002A
IC800VMMCONE002
IC800SSI104D2-CE
IC800VMM10MBKSE25A
IC800VMM10MBKSE25
IC800VMACONCN3A
IC800VMACONCN3
IC800VMA302 
IC800SLT001A
IC800SLA0201B
IC800VMA072-AA
IC800SSI104D2
IC800SKCEV050B
IC800SLA0752A
IC800SLA0102A
IC800SSD104RS1-DC
More......