Many products have not yet been launched, please contact us for more products

If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

IC697ACC720 Other names:

Input/output module IC697ACC720

IC697ACC720 communication module

Digital quantity module IC697ACC720

IC697ACC720 is produced by GE Automation and is a single slot PLC CPU capable of real-time control of industrial machinery. Communication with the I/O and "Intelligent Options" modules is achieved through a rack mounted backplane connection. This device is configured by MS-DOS or software applications running on older operating systems, including Windows 95 and Windows NT. IC697ACC720 has a 64MHz 80486DX2 microprocessor that can perform floating-point decimal calculations at a speed of 0.4 microseconds per Boolean function. This device supports up to 8K analog I/O and any combination of 12K inputs and outputs.

IC697ACC720 supports the following modules: discrete and analog I/O modules of IC697 series, IC660 and IC661 I/O modules, as well as multiple co processors and communication modules. This device allows up to 1 megabyte or user memory, maintained by an onboard lithium CMOS battery, as well as the device's calendar and clock. The operating system firmware is located in flash memory. Attention: Flash memory cannot store user information. Users can update firmware without disassembling the device or replacing the EPROM. To update the firmware, connect the device to a compatible computer, insert the firmware floppy disk, and then run the corresponding loader software.

To operate IC697ACC720, please use a three position RUN/STOP switch or connect a programmer and use programming software. Device configuration can be done through serial, parallel, or Ethernet interfaces. The device configuration is protected by password or manual memory protection key switch. When using a memory protected key switch, be sure to use a parallel connection programmer connected to the bus transmitter module. To prevent overheating, a fan with a capacity of 70 cubic feet per minute (CFM) is required. The equipment manual provides installation instructions. Before attempting installation, the rack power should be turned off. The memory protection key switch should be turned off, and the toggle switch must be in the stop position. Batteries can be connected to any connector. Connect the device to slot 1. Then turn on the device power.

All products on this website are special products, and market prices have been fluctuating,
Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

The new one is for sale, please contact customer service for further communication.

Related product recommendations:
IC698CHS009A
VMIVME-5567-000
IC698CHS009
IC698ACC701
IC698CHS117
IC698CHS117C
IC697PWR748
IC697PWR724
IC697PWR720
IC697PWR711
IC697PWR710H
IC697PWR710F
IC697PCM711P
IC697MEM717C
IC697CPX772-CB
IC697CPX928
IC697CPX928-FE
IC697CPX928-CD
IC697CPX935
IC697HSC700
IC697MDL241
IC697MDL250
IC697MDL350
IC697MDL652
IC697MDL653
IC697MDL671
IC697MDL740
IC697MDL750
more......