GE Motor field control 531X111PSHARG3
This module is a motor field control and power board. It is manufactured by General Electric for their 531X replacement board series. Drives and exciters developed by General Electric can have this card installed. The power required for the drive is provided by this card. The motor field circuit can also be powered using this device. This is the G3 version of this board, which means that the MOVs for the AC line are mounted externally instead of on the board.
Many products are not yet on the shelves. Please contact us for more products.
If the product model is inconsistent with the display picture, the model shall prevail. Please contact us for specific product pictures, and we will arrange to take photos in the warehouse for confirmation.
We have 16 shared warehouses around the world, so sometimes it may take several hours to return to you accurately, please understand. Of course, we will respond to your concerns as soon as possible.
531X111PSHARG3
- Motor field control &
power supply board is available in stock which ships the same day.
531X111PSHARG3 - Motor field control & power supply board comes in UNUSED as well as REBUILT condition.
To avail our best deals for 531X111PSHARG3 - Motor field control & power supply board, contact us and we will get back to you within 24 hours.
The 531X111PSHARG3 is a motor excitation control and power board developed by GE. It is part of the GE EX2000 excitation system. This card provides the necessary power to the drive. This component can also be used to power the motor excitation electronics. The MOVs for the AC line are located externally instead of on the board as this is the G3 version of the board.
531X111PSHARG3 Features
The efficiency of the power board is critical to the operation of the drive. This device can create three power supplies with nominal voltages of 5 VDC, 15 VDC, and 24 VDC. The motor excitation circuits in the drive are powered by an integrated pulse transformer on the card. Three onboard relays are used to control the device. K1 (RUN), K2 (MAX), and K3 form a TRIO (FAULT). There are also three potentiometers on the PCB.
These three terminals enable the user to calibrate and vary the current feedback and circuit: P1 FIELD SCALE, P2 CFB ZERO, and P3 CFB ADJUST. Five programmable jumpers on the card can be used to change the feedback and current signals of the card.
Functional
Description
The power required for the operation of the drive is provided by this power board. It also has the necessary facilities to power the motor excitation circuit on the board. This card is the G2 revision of the board and is designed for use with an external exciter. The card has gone through various changes that have produced various board arrangements. This card is the G3 revision with all MOVs mounted externally and connected to the AC line.
The operation of the drive depends on the proper operation of the 531X111PSHARG3 power board. This card produces three power supplies with rated voltages of 5 VDC, 15 VDC, and 24 VDC. The pulse transformer integrated on the card powers the motor excitation circuit in the drive. Device control is performed through three onboard relays. These three relays include K1 (Run), K2 (Maximum), and K3 (Fault). There are three more potentiometers on the board. These potentiometers include P1 FIELD SCALE, P2 CFB ZERO and P3 CFB ADJUST, all of which provide the user with the ability to adjust and calibrate the current feedback and circuit. The feedback and current signals in the card can be adjusted using five configurable jumpers on the card.
531X111PSHARG3 Installation
Users must follow a set of installation requirements provided by GE. Following these recommendations reduces the risk of equipment damage. Only trained professionals (who are qualified to handle this type of board) should install the 531X111PSHARG3. The manual and data sheet provided with the board have illustrated wiring diagrams. GE provides technical support for this board for the first time.
Features
Dimensions: 4 cm x 24 cm x 29.2 cm
Weight: 0.58 kg
Frequently
Asked Questions
What is the 531X111PSHARG3?
The 531X111PSHARG3 is a motor excitation control and power board developed by GE.
What is the output voltage rating of this component?
The output voltage ratings are 5 VDC, 15 VDC, and 24 VDC.
All products on this website are special
products, and the market price has been fluctuating.
The specific quotation is subject to customer service. Because the product is a new product, the price is not real.
Please confirm the model and product, price and other detailed information with customer service before placing an order. The website has been used.
New ones are on sale, please contact customer service for communication.
Recommended
models:
531X309SPCAJG1
531X305NTBANG1
531X307LTBAKG1
531X307LTBAJG1
531X307LTBAHG1
531X307LTBAFG1
531X305NTBAPG1
531X305NTBAJG1
531X304IBDASG1
531X304IBDARG1
531X304IBDAMG1
531X303MCPBDG1
531X303MCPBBG1
531X303MCPARG1
531X301DCCAFG2
531X121PCRALG1
531X302DCIABG3
531X175SSBAYM2
531X111PSHAKG3
More......
PRODUCT TAGS
Shanxi Runsheng Import and Export Co., Ltd
Address: 3301, Building A, Wanda Center, No. 175 Jiefang Road, Xinghualing District, Taiyuan City, Shanxi Province
Google email: wkcarshop666888@gmail.com
Industrial Control Sales Consultant: Amelia
Whatsapp: +86 18030295882