Many products have not been listed yet. For more products, please contact us

　　If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse

　　We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

　　1TGB120019P0013 Other names:

　　Control system module 1TGB120019P0013

　　1TGB120019P0013 processor module

　　CPU controller 1TGB120019P0013

　　The motor and feeder control unit of 1TGB120019P0013 MNS iS is responsible for managing and protecting the motor and other electrical loads to ensure their efficient, safe, and reliable operation. Intended to improve the performance, reliability, and intelligence level of the system.

　　Information related to the motor and feeder control unit of 1TGB120019P0013 MNS iS:

　　Structural features:

　　First part: Adopting a drawer design called M starter, only the primary components of the motor circuit, such as the main switch and contactor, are installed in the drawer. This design makes it possible to standardize the main circuit, thereby simplifying the selection work of designers.

　　Intelligent sensing technology: Within M starter, MNS iS adopts a new intelligent sensing technology, which completes detection functions through a chip embedded with a conductor. This technology can simultaneously measure the voltage, current, and temperature on the conductor at the wire end, and output digital signals.

　　System composition:

　　MNS is system architecture: an exchange center that contains Mlink data, serving as a router and information provider, connected to external communication interfaces such as DCS, OPC Server, etc.

　　MView touch screen human-machine interface: realizing monitoring and control functions.

　　MControl control and protection module: as well as the input and output interfaces of the circuit.

　　MStart current carrying unit: commonly known as drawer unit, including motor starter and feeding part, with a minimum size of 6E/4 (1E=25mm), which is more space saving.

　　The motor and feeder control unit of MNS iS adopts a drawer design, which allows the primary components of the motor circuit (such as the main switch and contactor) to be installed in the drawer, thereby achieving standardization of the main circuit.

　　The size of the drawer has been carefully designed to accommodate motor starter circuits with different rated powers. The types of drawers are limited, but they cover a wide range of starting methods (such as DoL, REV, SD), short-circuit capacities (such as 50kA, 80kA, etc.), and categories of main switches (such as circuit breakers or fuses).

　　This design eliminates the need for designers to select main switches, contactors, and other components.

　　The motor and feeder control unit of 1TGB120019P0013 MNS iS is a device used to control the motor and feeder, which has the following characteristics:

　　High precision control: 1TGB120019P0013 can achieve very precise position, speed, and torque control, meeting the needs of various high-precision motion control.

　　Quick response: 1TGB120019P0013 can quickly respond to input instructions, ensuring the dynamic performance of the system.

　　Multiple control modes: Common modes include position control mode, speed control mode, and torque control mode, which can be selected according to different application scenarios.

　　Overload protection: When the motor load exceeds the rated value, the driver can take timely protective measures to prevent damage to the motor and driver.

　　Automatic adjustment function: Some drives have the function of automatically optimizing control parameters to adapt to different loads and operating conditions.

　　Communication function: Supports multiple communication protocols, such as CAN bus, EtherCAT, etc., making it easy to integrate and network control with other devices.

　　Intelligent technology:

　　MNS iS adopts a new intelligent sensing technology within the M starter, which is based on the principle of shunt resistance and completes the detection function through a chip embedded in a conductor.

　　The intelligent sensor is installed at the output terminal of the M Starter and can simultaneously measure the voltage, current, and temperature on the conductor at the output terminal.

　　The output of the sensor is a digital signal, which is connected to the terminal through a data cable and led out to the slot of the MNS iS control module through a secondary adapter.

　　Network communication:

　　MNS iS supports various fieldbus communication protocols, such as ModBus RTU, ProfiBus DP, and OPC technology, achieving efficient communication and data exchange between devices.

　　This network communication capability enables the MNS iS system to conveniently achieve centralized monitoring, remote control, and fault diagnosis, improving the reliability and usability of the system.

　　System features:

　　The MNS iS system achieves complete separation of primary and secondary components, making the product easier to use, maintain, and upgrade.

　　The use of universal third-party hardware and software has increased the openness and versatility of the product.

　　Functional features:

　　Standardization and Modularization: MNS iS has achieved unprecedented standardization and modularity in motor control centers, making products easier to use, maintain, and upgrade.

　　Security: The cabinet design of the MNS system physically separates the routing of the primary and secondary circuits, and is located in separate compartments on both sides to ensure the safety of the operation.

　　Openness and versatility: The use of universal third-party hardware and software increases the openness and versatility of the product.

　　The overall solution of the MNS iS intelligent motor control center not only considers the intelligent components of motor protection, but also comprehensively considers the needs of communication and network structure, achieving product standardization and modularization.

　　In summary, the motor and feeder control unit of 1TGB120019P0013 MNS iS provides strong support for the use and expansion of low-voltage cabinets in industrial sites through its unique design, intelligent technology, and network communication capabilities.

　　All products on this website are special products, and market prices have been fluctuating,

　　The specific customer service quotation shall prevail, as the product is a new product and the price is not genuine,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　The new one is for sale, please contact customer service to communicate.

Warehouse discount product recommendation:
1TGE120011R1511
1TGE120011R1512
1TGE120011R1520
1TGE120011R1521
1TGE120011R1522
1TGE120011R1600
1TGE120011R1610
1TGE120011R1601
1TGE120011R1611
1TGE120011R1620
1TGE120011R1621
1TGE120011R2020
1TGE120011R2022
1TNE968900R0110
1TGE120004R0101
more......